Posts for: June, 2016
Controlling discomfort during dental work is one of our top priorities. Advances in anesthesia over the last century have made that objective easier to attain, especially for routine procedures.
The term anesthesia means “without feeling or pain.” It refers to the use of substances to prevent a patient’s nervous system from sensing pain. There are two basic types: general, through intravenous injection (IV) or gas inhalation that places a patient in an unconscious state; and local, which only affects the part of the body involved in the procedure while the patient remains conscious.
The latter type has become very important in dentistry, especially for mild to moderate procedures. Because teeth and gum tissues are rich in nerves, patients can have a heightened level of sensitivity that can increase anxiety and discomfort during dental work. Local anesthesia reduces that discomfort and relaxes both patient and dental provider.
We typically administer local anesthesia in two ways: by applying the anesthetic to the outside tissue surface (with a cotton swab, patch or spray) or by injection. The first type, topical anesthesia, is most often used to eliminate the pricking discomfort of the needle used to inject the main anesthetic. Using both applications eliminates any painful sensation at all — the only thing you might feel is a slight pressure during the procedure.
As mentioned before, local anesthesia benefits us as well as you. Knowing you’re at ease and comfortable allows us to better focus on the procedure — we’re not rushed to finish to spare you further discomfort. A relaxed, unhurried atmosphere is essential to a successful outcome for any dental procedure.
We’ve also found solutions for another issue with local anesthesia that concerns patients: the length of time the numbing effect lingers after a procedure. In response, the dental profession has developed different types of anesthesia that reduce this after effect considerably. We’re also more selective about what procedures actually require anesthesia — some, like routine teeth cleaning or work on the outer enamel (which doesn’t contain nerves), can usually be performed without it.
All in all, local anesthesia reduces your level of discomfort and increases our ability to be thorough in performing your dental work. You’ll not only find the experience more pleasant, but it will also enhance the quality of your care.
If you would like more information on alleviating pain and discomfort during dental work, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Local Anesthesia for Pain-Free Dentistry.”
If we could go back in time, we all probably have a few things we wish we could change. Recently, Dr. Travis Stork, emergency room physician and host of the syndicated TV show The Doctors, shared one of his do-over dreams with Dear Doctor magazine: “If I [could have] gone back and told myself as a teenager what to do, I would have worn a mouthguard, not only to protect my teeth but also to help potentially reduce risk of concussion.”
What prompted this wish? The fact that as a teenage basketball player, Stork received an elbow to the mouth that caused his two front teeth to be knocked out of place. The teeth were put back in position, but they soon became darker and began to hurt. Eventually, both were successfully restored with dental crowns. Still, it was a painful (and costly) injury — and one that could have been avoided.
You might not realize it, but when it comes to dental injuries, basketball ranks among the riskier sports. Yet it’s far from the only one. In fact, according to the American Dental Association (ADA), there are some two dozen others — including baseball, hockey, surfing and bicycling — that carry a heightened risk of dental injury. Whenever you’re playing those sports, the ADA recommends you wear a high-quality mouth guard.
Mouthguards have come a long way since they were introduced as protective equipment for boxers in the early 1900’s. Today, three different types are widely available: stock “off-the-shelf” types that come in just a few sizes; mouth-formed “boil-and-bite” types that you adapt to the general contours of your mouth; and custom-made high-quality mouthguards that are made just for you at the dental office.
Of all three types, the dentist-made mouthguards are consistently found to be the most comfortable and best-fitting, and the ones that offer your teeth the greatest protection. What’s more, recent studies suggest that custom-fabricated mouthguards can provide an additional defense against concussion — in fact, they are twice as effective as the other types. That’s why you’ll see more and more professional athletes (and plenty of amateurs as well) sporting custom-made mouthguards at games and practices.
“I would have saved myself a lot of dental heartache if I had worn a mouthguard,” noted Dr. Stork. So take his advice: Wear a mouthguard whenever you play sports — unless you’d like to meet him (or one of his medical colleagues) in a professional capacity…
All crowns are designed to restore functionality to a damaged tooth. But crowns can differ from one another in their appearance, in the material they’re made from, and how they blend with other teeth.
A crown is a metal or porcelain artifice that’s bonded permanently over a decayed or damaged tooth. Every crown process begins with preparation of the tooth so the crown will fit over it. Afterward, we make an impression of the prepared tooth digitally or with an elastic material that most often is sent to a dental laboratory to create the new crown.
It’s at this point where crown composition and design can diverge. Most of the first known crowns were made of metal (usually gold or silver), which is still a component in some crowns today. A few decades ago dental porcelain, a form of ceramic that could provide a tooth-like appearance, began to emerge as a crown material. The first types of porcelain could match a real tooth’s color or texture, but were brittle and didn’t hold up well to biting forces. Dentists developed a crown with a metal interior for strength and a fused outside layer of porcelain for appearance.
This hybrid became the crown design of choice up until the last decade. It is being overtaken, though, by all-ceramic crowns made with new forms of more durable porcelain, some strengthened with a material known as Lucite. Today, only about 40% of crowns installed annually are the metal-porcelain hybrid, while all-porcelain crowns are growing in popularity.
Of course, these newer porcelain crowns and the attention to the artistic detail they require are often more expensive than more traditional crowns. If you depend on dental insurance to help with your dental care costs, you may find your policy maximum benefit for these newer type crowns won’t cover the costs.
If you want the most affordable price and are satisfied primarily with restored function, a basic crown is still a viable choice. If, however, you would like a crown that does the most for your smile, you may want to consider one with newer, stronger porcelain and made with greater artistic detail by the dental technician. In either case, the crown you receive will restore lost function and provide some degree of improvement to the appearance of a damaged tooth.
Our bodies wage a continuous war against enemies too small to be seen with the naked eye. If we’re healthy, our immune system will stop the vast majority of these microbial agents.
But some of them, viruses in particular, are so small and with certain characteristics that they can slip past our immune systems. Prevention — removing the opportunity for these viruses to gain entry into our bodies in the first place — is a key component in controlling infection.
Healthcare facilities, including dental offices, are primary battlegrounds in this war. In recent years, the stakes have increased as viral infections that cause the liver disease hepatitis (B and C) and HIV that causes the auto-immune disorder AIDS are on the rise. Although different in effect, these viruses spread in much the same way — when the blood of an infected person comes in contact with the bloodstream of another person.
The risk for this exposure is higher in situations when there’s a break in the skin. Blood transfusion, surgery centers and similar facilities with invasive procedures require high standards of protection to prevent viral transmission between people.Â This includes dental clinics — even a routine hygienic cleaning can become a conduit for viral infection.
As a result, the more than 170,000 dental providers across the country have adopted strict infection control standards that conform to the National Center for Disease Control (CDC) guidelines, as well as state and local regulations. These standards detail such issues as wearing protective equipment and clothing (like disposable gloves, gowns or facemasks), cleaning and sterilizing instruments, or disposing of bio-hazardous waste.
High infection control standards are also promoted by the professional boards and organizations of dental providers, like the American Dental Association, and are a requirement for continued membership.Â As a result, infection occurrences from dental visits or procedures are extremely rare.
We understand you may have concerns. We’re glad to discuss with you our procedures for infection control and how we’re following the highest standards to keep you and our staff safe. We’re making sure the care you receive for your teeth and gums doesn’t lead to another health problem.
If you would like more information on dental infection control practices, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Infection Control in the Dental Office.”
If you have limited financial resources, learning what it will cost to restore your teeth and gums to good health could be a shock. Dental care can be expensive, especially for treating advanced dental disease.
Properly managing your ongoing dental care can greatly reduce the chances for higher expenses in the future. Here are 3 tips for staying ahead of problems that might cost you dearly tomorrow.
Practice prevention now. Dental disease doesn’t come out of nowhere — it’s the product of a bacteria-rich environment and neglect. You can help eliminate that environment by removing plaque — a thin film of bacteria and food particles built up on tooth surfaces — with daily brushing and flossing. Twice-a-year dental cleanings remove plaque and calculus (hardened plaque deposits) you can’t reach with daily brushing. Reducing sugar (which bacteria feed on) in your diet and treating low saliva flow (which can increase decay-causing acid in the mouth) will round out your prevention practices.
Take care of emerging problems as soon as possible. Dental disease typically doesn’t go away by itself: more likely, it will get worse — and more costly — with time. Don’t wait to see us if you encounter tooth pain or bleeding, tender or swollen gums. In some cases, we can take temporary measures like resin-based fillings in decayed areas that can buy a little time while you prepare for the expense of a more permanent restoration.
Adopt a long-term care strategy. Our goal is for you to have as healthy a mouth as possible.Â To that end, we’ll work with you on strategy and payment plans that address your individual needs. A good strategy puts a priority on treating emergencies or advanced disease first, followed by treating less affected teeth as you’re able to afford it. We may also be able to address your tooth and gum problems with fewer but longer sessions that can help ease pressure on your costs.
Adopting solid hygiene and dietary habits now, visiting us at least twice a year and following a plan to treat problems as they emerge is your best approach for keeping dental care from making a huge impact on your wallet.
If you would like more information on managing your dental health, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Cost-Saving Treatment Alternatives.”